10mm Exhaust Stud & Lock Nut M10x1.25 - Pack of 4 Studs 4 Nuts USA SELLER

Description

One set of four exhaust manifold studs and nuts Honda.
Nuts  M10-1.25
Flange O.D. 19mm
14mm Hex
Studs m10-1.25x48mm class 8.8 metric studs
This is a popular size for most Toyota vehicles, especially the Pick-up trucks, and some other Asian vehicles such as Honda, Isuzu, Subaru, etc.  However, many Acura, Honda, and Nissan exhaust manifolds require an M8x1.25 stud/nut size rather than a M10x1.25.  If you are uncertain what size you need, feel free to ask before you purchase.  If you need the 8mm version, we have those available in our eBay store as well.
You can usually determine what size you need by checking the hex size of the nut.  If a 12mm or 13mm socket / wrench fits the nut, most likely you have 8mm studs/nuts.  If the nut requires a 14mm socket/wrench,
then likely you have 10mm studs/nuts. It is important to verify your thread pitch as well.  Some vehicles, such as Mazda and Volvo, may have a coarser M10x1.5 thread pitch, in which case these M10x1.25 studs/nuts will not work for those applications.